| Product compliance and market suitability | Model-specific test reports, declarations of conformity, and a list of intended sales markets and applicable requirements. | Confirm that documents cover the exact frame, motor, battery, and configuration being quoted. Check requirements for the destination market; requirements differ by jurisdiction. | 15% | — / 5 |
| Battery safety and traceability | Battery specifications, cell and pack traceability records, protection-system details, and applicable transport test documentation. | Verify that the supplied battery configuration is covered by relevant evidence, such as UN 38.3 transport testing and applicable battery safety requirements. Match serial or lot records to the delivered pack. | 15% | — / 5 |
| Frame and bicycle safety testing | Frame material and process specifications, inspection records, and test reports for the relevant bicycle category and intended use. | Ask for reports against applicable bicycle safety standards, such as the relevant parts of ISO 4210, and confirm the tested frame design matches the production model. | 12% | — / 5 |
| Motor and electrical-system integration | Motor and controller specifications, wiring diagrams, compatibility records, and functional-test procedures. | Confirm the motor rating, assistance behavior, and configuration meet the destination market’s rules. Check that the supplier tests the complete electrical system, not only individual components. | 10% | — / 5 |
| Quality management and production controls | Quality-management documentation, incoming inspection plans, in-process checks, final inspection records, and corrective-action examples. | Look for documented, repeatable controls with recorded results, defined defect handling, and traceability from incoming parts through final assembly. Treat a certificate as supporting evidence, not a substitute for an audit. | 12% | — / 5 |
| Factory capability and process control | Facility tour or audit, process flow, equipment list, staff responsibilities, production records, and subcontractor disclosures. | Verify that the supplier can explain which operations are performed in-house, which are outsourced, and how outsourced processes are controlled. Confirm that the audited site is the site producing the order. | 10% | — / 5 |
| Production capacity and delivery planning | Recent production schedule, capacity assumptions, lead-time breakdown, order milestones, and contingency plan for constrained parts. | Compare the promised schedule with documented capacity and component availability. Require written milestone dates and prompt notice of changes rather than relying on an unsupported monthly-capacity figure. | 8% | — / 5 |
| Sampling and pre-shipment inspection | Pre-production sample, approved specification sheet, inspection checklist, and sample inspection or test report for the order. | Approve a representative sample before mass production and define inspection criteria in writing. Verify product configuration, labeling, packaging, and agreed functional checks before shipment. | 8% | — / 5 |
| Warranty, spare parts, and after-sales support | Written warranty terms, claim process, spare-parts list, service documentation, and response-time commitment. | Check coverage periods and exclusions by component, responsibility for freight and replacement parts, and the availability of technical support. Terms should be contractual and specific to the order. | 6% | — / 5 |
| Commercial transparency and document control | Itemized quotation, bill of materials or configuration list, change-control procedure, and clear payment and shipping terms. | Require written approval for substitutions or specification changes. Ensure the quote, approved sample, production order, and compliance documents refer to the same model configuration. | 4% | — / 5 |
| Total suggested weighting | 100% | — |