| EMI/RFI Power-Line Filters | Attenuate conducted electromagnetic noise entering or leaving equipment through power conductors. | Variable-frequency drives, machine tools, industrial control panels, power supplies, and automated production equipment. | Rated voltage and current, frequency range, leakage current, connection method, and compatibility with the installation’s grounding arrangement. |
| Shielded Enclosures and Cabinets | Reduce radiated emissions from equipment and protect internal electronics from external electromagnetic fields. | Control cabinets, test systems, sensitive measurement equipment, communications hardware, and high-noise manufacturing areas. | Required shielding effectiveness, enclosure seams and apertures, door bonding, ventilation, cable entry design, and environmental rating. |
| Shielded Cables and Cable Glands | Limit coupling of electromagnetic interference to and from signal or power cables when the shield is properly terminated. | Encoder and sensor wiring, industrial Ethernet, motor connections, robotics, and process-control instrumentation. | Signal type, cable length, flexing requirements, shield coverage, connector compatibility, and low-impedance termination at the equipment entry point. |
| Ferrite Cores and Common-Mode Chokes | Suppress selected high-frequency noise currents on cables without substantially affecting the intended signal or power flow. | Control and data cables, switching power converters, motor-drive wiring, and equipment troubleshooting or retrofit work. | Noise frequency, cable configuration, current and temperature limits, core material, and the number of cable passes through the core. |
| Surge Protective Devices | Limit transient overvoltages caused by switching events or lightning-related surges, helping protect connected equipment. | Factory distribution boards, PLC and instrumentation circuits, outdoor equipment, and control systems with long cable runs. | System voltage, AC or DC application, surge exposure, protection level, coordination with upstream devices, and installation lead length. |
| Grounding and Equipotential Bonding | Provide controlled paths for fault and interference currents and reduce voltage differences between conductive parts. | Machine frames, control cabinets, cable trays, production lines, and installations with multiple interconnected systems. | Low-impedance connections, bonding continuity, conductor routing, contact surface preparation, and compliance with applicable electrical codes. |
| EMC Cable-Entry Plates and Conductive Gaskets | Maintain electrical continuity and shielding at cabinet openings, joints, doors, and cable penetrations. | Shielded enclosures, modular control cabinets, equipment doors, and panels requiring multiple cable entries. | Opening dimensions, material compatibility, compression requirements, corrosion resistance, and preservation of the enclosure’s ingress protection. |
| Optical-Fiber Links | Use light rather than electrical signaling to provide galvanic isolation and avoid conducted interference on the communication path. | Communication between electrically noisy areas, long-distance industrial networks, high-voltage environments, and isolated control systems. | Required data rate and distance, fiber type, connector standard, bend radius, environmental conditions, and transceiver compatibility. |