| Powder gelatin | Dry granules that are generally soaked in cool liquid before heating. Dissolution time depends on particle size and processing. | Desserts, confectionery, dairy foods, prepared foods, and some pharmaceutical or technical uses. | Bloom strength, particle size, moisture, pH, ash, viscosity, and dissolution instructions. | Confirm whether the powder needs pre-soaking and whether the quoted Bloom value applies to the supplied lot. |
| Instant or agglomerated powder | Processed to disperse more readily than many conventional powders; exact mixing performance depends on the product. | Dry mixes, beverage preparations, and applications requiring convenient dispersion. | Bloom strength, dispersibility, particle size, moisture, and recommended mixing temperature. | Request application-specific dispersion instructions and test for lumping in the intended liquid and process. |
| Gelatin sheets or leaves | Thin, dried sheets that are typically softened in cold water and then dissolved. Sheet weight and strength can differ by supplier. | Bakery, pastry, confectionery, and culinary preparations. | Bloom strength where declared, sheet weight, moisture, and dosage guidance. | Compare sheets by documented strength and weight, not by color or sheet count alone. |
| Low Bloom gelatin | Often selected when a softer gel or a particular texture is required. Commercial Bloom values vary by supplier and grade. | Soft-texture foods and formulations where a firm gel is not desired. | Declared Bloom value, viscosity, gel-setting behavior, and recommended dosage. | Ask for the test method and test conditions used to determine Bloom strength. |
| Medium Bloom gelatin | A general-purpose range; products around 150–220 g Bloom are commonly encountered, but ranges are not universal. | Many food applications, including confectionery, desserts, and dairy products. | Bloom strength, viscosity, pH, moisture, ash, and microbiological limits. | Match the specification to the target texture and the process conditions rather than relying on the grade name alone. |
| High Bloom gelatin | Higher gel strength can support firmer gels or lower use levels in some formulations; performance depends on the full recipe and process. | Firm gels, selected confectionery products, and other applications requiring higher gel strength. | Declared Bloom value, viscosity, setting behavior, particle size, and dosage recommendations. | Run a formulation trial; a higher Bloom value does not by itself guarantee the desired texture or processing performance. |
| Type A gelatin | Produced using acid pretreatment. Gelatin type describes processing, not a universal quality ranking. | Food, pharmaceutical, or technical uses when its functional properties suit the formulation. | Type, pH, Bloom strength, viscosity, moisture, ash, and application-specific purity requirements. | Confirm the stated type and suitability for the intended use; do not infer source or performance from type alone. |
| Type B gelatin | Produced using alkaline pretreatment. Bovine hide or bone gelatin may be offered as Type B, depending on the process. | Food, pharmaceutical, or technical uses when its functional properties suit the formulation. | Type, pH, Bloom strength, viscosity, moisture, ash, and application-specific purity requirements. | Check the process description and lot-specific certificate of analysis; type alone does not define the complete specification. |
| Food grade | Intended for food use when manufactured and supplied in compliance with applicable food requirements. | Foods and beverages where gelatin is permitted and suitable for the product. | Identity, Bloom strength, moisture, microbiological criteria, contaminants, and applicable food-standard documentation. | Verify the intended market’s regulatory requirements, traceability, allergen and handling statements, and food-safety documentation. |
| Pharmaceutical grade | Supplied to a defined pharmaceutical specification; requirements depend on the intended dosage form and market. | Capsules, coatings, and other approved pharmaceutical applications. | Applicable compendial requirements, identity, viscosity or Bloom strength, microbial quality, and change-control documentation. | Confirm the applicable pharmacopoeia and obtain current specifications and lot documentation for the intended application. |