| Silicone sealants | Building joints, glazing, sanitary areas, and weather sealing; formulation determines suitability. | Movement capability, adhesion to specified substrates, cure type, temperature range, and resistance to weathering or moisture. | ASTM C920; ISO 11600; EN 15651; ASTM C719 for cyclic movement testing. Applicability depends on product and intended use. | Request technical data for the exact grade and substrates; check whether primer is required and whether the product is suitable for the intended exposure. | Substrate guidance, application instructions, sample evaluation, and export packaging options. |
| Polyurethane sealants | Construction and concrete joints, flooring joints, and other applications specified by the product manufacturer. | Elastic recovery, movement rating, adhesion, cure time, paintability, and resistance to the chemicals or weather conditions in service. | ASTM C920; ISO 11600; EN 15651; ASTM C719. Confirm the claimed class and test scope for the specific grade. | Check substrate moisture limits, joint design guidance, cure conditions, and any restrictions for potable-water or food-contact use. | Joint-design support, application recommendations, batch documentation, and technical response arrangements. |
| Silyl-modified polymer (MS polymer) sealants and adhesives | Construction sealing and bonding applications where the selected formulation is compatible with the substrates and exposure. | Adhesion, elasticity, paintability, cure speed, and resistance to UV, water, or temperature changes as specified for the grade. | Use relevant application standards such as EN 15651 or ISO 11600 when the product falls within their scope; request test methods and reports for other claims. | Verify compatibility with plastics, metals, coatings, and natural stone; request evidence for specific performance claims. | Compatibility testing guidance, application trials, and technical data in the required language. |
| Epoxy adhesives | Structural or industrial bonding of suitable metals, composites, ceramics, and other materials, depending on formulation. | Mix ratio, working life, cure schedule, lap-shear strength, temperature performance, and chemical resistance. | ISO 4587 and ASTM D1002 are commonly used for comparative tensile lap-shear testing of adhesive-bonded specimens; test conditions affect results. | Confirm surface preparation, mixing and dispensing requirements, cure conditions, and whether reported strength values match the intended substrates. | Bond-line design advice, sample testing, dispensing guidance, and shelf-life documentation. |
| Cyanoacrylate adhesives | Fast assembly and small-area bonding of compatible materials in manufacturing and maintenance. | Fixture time, viscosity, gap-filling ability, substrate compatibility, and resistance to heat, impact, or moisture. | Compare supplier test methods and application-specific results; verify any claimed industry or regulatory requirements against the target market. | Check blooming, surface sensitivity, storage conditions, safety data, and suitability for the exact materials being bonded. | Material compatibility advice, sample quantities, and storage and handling instructions. |
| Hot-melt adhesives | Packaging, assembly, woodworking, and product construction using equipment designed for hot-melt application. | Open time, set time, viscosity at application temperature, bond strength, and heat resistance in service. | Request the supplier’s test methods and performance data for the intended substrate, application temperature, and operating conditions. | Confirm equipment compatibility, operating temperature, feed format, and safe handling requirements. | Machine-setting recommendations, trial support, and packaging-format options. |
| Quality, documentation, and export readiness | Relevant across product families and destination markets. | Batch consistency, traceability, change control, packaging integrity, and agreed inspection criteria. | ISO 9001 concerns quality-management systems; ISO 14001 concerns environmental-management systems. Certification should be verified for the relevant site and scope. | Request current certificates, technical data sheets, safety data sheets, certificates of analysis where available, and test reports for the exact product and production site. | Confirm sample lead time, minimum order quantity, production lead time, private-label options, export documents, and after-sales response process. |