| Function and operating conditions | Explain what the cover protects, how it is installed, and the conditions it will encounter, such as indoor or outdoor use, temperature, moisture, dust, or vibration. | State whether the cover is cosmetic, protective, structural, or part of an enclosure. Define any required ingress-protection rating for the complete assembled enclosure. | Review the application description, assembly drawings, and any applicable enclosure test requirements. |
| Material and thickness | Specify the material grade, sheet thickness, and any material-property or certification requirements. | For example, specify a particular steel or aluminum grade and a nominal thickness such as 1.5 mm. Confirm whether the thickness is measured before or after coating. | Check material certificates or inspection records, and measure sheet thickness with a suitable calibrated gauge. |
| Geometry and dimensions | Provide a dimensioned 2D drawing and, where useful, a 3D model. Define overall size, bends, flanges, radii, cutouts, and formed features. | Identify critical dimensions and datum references. State the dimensional tolerance standard or specify tolerances directly on the drawing; do not assume one tolerance fits every feature. | Inspect samples using calibrated measuring tools, templates, or a coordinate-measuring system where appropriate. |
| Mounting and interfaces | Define hole locations, slot sizes, fastener types, mating surfaces, clearances, and required alignment with the base or chassis. | Show hole-center dimensions from defined datums and identify threaded, countersunk, or clearance holes. Include mating-part information when fit is critical. | Compare the part with the drawing and perform a trial assembly using representative mating components. |
| Edges, burrs, and formed features | Set expectations for deburring, sharp edges, bend quality, corner treatment, and any louvered or embossed features. | Specify that cut edges are free of harmful burrs and sharp projections. Define any required edge radius or limits for visible deformation. | Use visual and tactile inspection, plus dimensional checks for bends and formed features. |
| Surface finish and appearance | Specify the finish process, color, gloss, texture, and which surfaces are cosmetic or concealed. | Identify the required coating type and color reference, if applicable. Set acceptance criteria for visible scratches, dents, coating defects, and color variation. | Inspect under agreed lighting and viewing conditions. Measure coating thickness or color when those properties are specified. |
| Strength and load requirements | Describe expected loads, support points, deflection limits, and any handling or impact conditions. | Provide a defined load case and allowable deflection where the cover supports equipment or must resist pressure, vibration, or handling forces. | Review the design analysis or conduct a documented load or fit test using the agreed method. |
| Joining and assembly | Identify required welds, clinch features, inserts, studs, adhesives, or other joining methods, along with their locations and acceptance criteria. | Show joining locations and dimensions on the drawing. Specify weld appearance or strength requirements only where they are relevant to the part’s function. | Inspect joining features and verify assembly fit; use a defined strength test if required by the application. |
| Production volume and delivery | State prototype quantity, expected production volume, batch size, packaging needs, and delivery schedule. | Distinguish one-time samples from recurring production quantities, since tooling and process choices can vary with volume. | Request a quotation that identifies lead time, minimum order quantity, tooling charges, and packaging assumptions. |
| Quality records and compliance | Define inspection documents, traceability, material declarations, and any market-specific regulatory requirements. | List required records, such as an inspection report or material declaration. Name applicable substance or product regulations only when they apply to the finished product and target market. | Review sample records and confirm that the manufacturer can provide the specified documentation for production lots. |