| Metallic silver ink | Metal flakes, commonly aluminum, reflect light to create a bright metallic appearance. | Paper, card, plastics, coated materials, and some textiles, depending on the ink binder. | Packaging, labels, promotional graphics, decorative panels, and metallic lettering. | Flake size and ink deposit affect coverage and sparkle. Use a screen opening suited to the particle size; very fine mesh can restrict larger flakes. | May be air-dried, heat-dried, or cured by another specified method, depending on the ink system and substrate. | Produces a strong metallic look, but the flakes can settle and may make fine details harder to print. |
| Metallic silver plastisol | Metallic-effect pigments are dispersed in a plastisol binder. | Compatible textiles, especially fabrics intended for plastisol printing. | Apparel graphics, logos, lettering, and decorative textile prints. | A relatively open screen is often used for coarser metallic particles or heavier deposits. Test opacity, hand feel, and registration on the actual fabric. | Requires heat to fuse the ink. Follow the ink’s technical data for curing conditions and verify that the full ink film reaches the required cure. | Can give a durable metallic textile print, but the print may feel heavier than a thin standard ink layer. |
| Water-based metallic silver ink | Metallic pigment is carried in a water-based binder. | Suitable textiles and selected porous or coated surfaces, as specified for the formulation. | Textile decoration and other jobs where a water-based ink system is appropriate. | Keep the ink from drying in the screen during production. Mesh choice depends on pigment size, desired deposit, and the substrate. | Water must evaporate; some formulations also require heat to develop the specified film properties. Check the product instructions. | Can suit jobs seeking a water-based process, but drying behavior and substrate compatibility require careful testing. |
| Silver-effect, non-metallic ink | Non-metallic pigments create a gray, pearlescent, or reflective-looking effect without relying on large metal flakes. | Substrates compatible with the chosen ink binder, including selected paper, plastics, and textiles. | Fine graphics, small lettering, decorative details, and designs where a smoother print is preferred. | Often more suitable than coarse-flake inks for finer detail, but the achievable finish depends on pigment, mesh, and print deposit. | Drying or curing depends on whether the ink is water-based, solvent-based, UV-curable, or another formulation. | May print more smoothly, but usually does not match the reflective sparkle of a true metallic-flake ink. |
| Conductive silver ink | Silver particles form electrically conductive paths after the ink dries or cures. | Selected flexible films, plastics, paper, and other substrates designed for printed electronics. | Printed circuits, electrodes, sensors, antennas, and conductive traces. | Mesh, stencil thickness, particle size, line width, and deposit must be matched to the electrical design. Measure resistance on test prints rather than judging appearance alone. | Curing conditions are formulation- and substrate-dependent. Some systems require elevated temperatures, so check substrate heat tolerance and technical specifications. | Designed for electrical performance, not simply decorative appearance; typically requires more process control and material testing. |