| Competition rules | Allowed tire categories, dimensions, tread requirements, and any restrictions on tire changes or modifications. | Use only a tire type permitted by the event regulations. | Some events require a treaded tire or specify when a wet-weather tire may be used. | Read the current event and class regulations before buying or mounting tires; confirm unclear requirements with the organizer. |
| Track surface and layout | Surface material, grip level, corners, elevation changes, and the amount of standing water likely to occur. | A suitable dry tire should provide predictable grip without overheating during the event. | Grooves and tread channels can help move water away from the contact area, but performance depends on tire design and water depth. | Use recent event information and track conditions to guide selection rather than relying on the event name alone. |
| Weather and track temperature | Forecast air temperature, expected track temperature, rain, and whether conditions may change during a session. | Choose a tire compound intended for the expected temperature range; excessive heat can accelerate wear. | Rain, cooler surfaces, and changing conditions may require a different approved tire and a more cautious warm-up. | Check the forecast close to the event and follow the tire maker’s guidance for the selected tire. |
| Tire compound | Whether the tire is offered in different compounds and the temperature range or use case stated by its manufacturer. | A softer compound may offer more grip but can wear faster; a harder compound may last longer but provide less grip in some conditions. | Compound alone does not determine wet-weather suitability; use a tire designed and approved for the conditions. | Balance grip, durability, session length, and temperature instead of selecting solely by compound softness. |
| Tread and water clearance | Tread pattern, tread depth, and any minimum or maximum tread rules in the event regulations. | For a dry-only tire, verify that its construction and use are allowed in the class. | Purpose-designed wet tires use tread patterns to help channel water; they cannot eliminate the risk of hydroplaning in deep water. | Do not cut or modify tread unless the rules and tire manufacturer explicitly allow it. |
| Size and fitment | Approved wheel diameter and width, tire dimensions, vehicle clearances, and any class limits. | Correct fitment helps preserve handling and avoids contact with suspension or bodywork. | Use the same fitment checks for wet-weather tires; dimensions can differ between tire models. | Confirm compatibility with the vehicle, wheel, and regulations before purchasing. |
| Pressure and setup | Recommended cold pressure, measurement procedure, and any event-specific setup guidance. | Pressure changes as tires warm up and can affect grip, stability, and wear. | Wet conditions may call for a different setup, but there is no universal wet-pressure setting. | Start with the tire manufacturer’s guidance, measure consistently, and make small, documented adjustments within safe limits. |
| Condition and preparation | Age, wear, damage, uneven wear, and any restrictions on previously used tires or tire treatments. | Inspect the full tread and sidewalls; replace tires with damage or wear beyond permitted limits. | Insufficient tread or damage can reduce water evacuation and make handling less predictable. | Check tires before each event and follow the rules on tire treatments, marking, and permitted tire changes. |