| Cotton fiber | Grown as a seed-hair fiber, then harvested, cleaned, and spun. Further purification may be used for specialty cellulose applications. | Soft, breathable, and familiar in apparel, home textiles, and medical or absorbent products. | Impacts depend on farming practices, irrigation, land use, and processing. Recycled cotton can reduce demand for virgin fiber, though fiber length and quality may be reduced. | Generally suitable for common textile uses. Dust from fiber processing can irritate the respiratory system; control airborne dust in industrial settings. | You need a widely available natural fiber with established textile processing and a soft hand feel. |
| Flax (linen) fiber | Fibers are separated from flax stems using retting, followed by mechanical breaking, scutching, and hackling. | Strong bast fiber with a crisp feel; used in apparel, household textiles, and some technical applications. | Water, energy, and chemical demands vary with cultivation and retting methods. Retting wastewater may require management to limit environmental impacts. | Mechanical processing can create dust and flying particles, so suitable ventilation and workplace controls are important. | You value a strong plant-based bast fiber and can accommodate its distinctive texture and processing requirements. |
| Hemp fiber | Fibers are extracted from hemp stems, commonly using retting and mechanical separation; additional refining may be needed for finer textiles. | Useful for durable textiles, ropes, nonwovens, and composite reinforcement. Fiber fineness and feel vary with variety and processing. | Crop impacts depend on location, farming inputs, retting, and processing. Claims of low water or chemical use should be checked against the specific supply chain. | Dust and particles may arise during processing. Follow workplace controls and applicable regulations for the material and process. | You need a durable bast fiber and have a supply chain capable of meeting the required fineness and consistency. |
| Dissolving wood pulp | Wood is pulped and purified to produce high-cellulose pulp suitable for dissolving and conversion into regenerated fibers or other cellulose products. | A feedstock rather than a finished textile fiber; used to make products such as viscose, lyocell, and cellulose derivatives. | Forest sourcing, pulping chemicals, energy, and mill wastewater are key factors. Verify responsible sourcing and site-specific process information. | Dry pulp dust can be an inhalation or combustible-dust concern in industrial handling. Chemical hazards depend on the pulping and purification process. | You are selecting a cellulose raw material and need a consistent pulp grade for downstream conversion. |
| Viscose rayon (regenerated cellulose) | Purified cellulose is dissolved and regenerated into fibers. Conventional viscose processing uses chemicals including sodium hydroxide and carbon disulfide. | Soft, drapable fiber used in clothing, linings, and home textiles; properties vary by fiber design and manufacturing route. | Impacts depend on pulp sourcing, energy, wastewater treatment, and recovery or control of process chemicals. Assess the specific mill rather than relying on the fiber name alone. | Carbon disulfide presents significant worker-health and safety hazards during manufacture. Effective containment, monitoring, and process controls are essential. | You need a soft regenerated fiber and can verify strong chemical-management and emissions controls in the manufacturing supply chain. |
| Lyocell (regenerated cellulose) | Cellulose is dissolved in an aqueous N-methylmorpholine N-oxide (NMMO) solvent system and formed into fibers; solvent recovery is commonly part of the process. | Can provide a soft feel and good strength, including when wet; used in apparel, home textiles, and nonwovens. | Solvent recovery can reduce solvent losses, but overall impacts still depend on pulp sourcing, energy use, solvent management, and wastewater treatment. | NMMO and hot process solutions require appropriate industrial controls. Finished-fiber safety depends on product specifications and intended use. | You want a regenerated cellulose fiber and can confirm the producer’s solvent-recovery performance and source of pulp. |
| Cellulose acetate | Cellulose is chemically modified through acetylation and then processed into fibers, commonly using an acetone-based spinning solution. | Often used for linings, apparel, and specialty fabrics; can offer a smooth appearance and drape. | It is a cellulose derivative, not unmodified cellulose. Environmental breakdown depends on the degree of substitution, product form, and disposal conditions; do not assume rapid biodegradation. | Acetone is a volatile, highly flammable solvent used in some manufacturing routes, requiring appropriate fire and exposure controls. | You need the appearance or performance of acetate and have checked solvent controls and end-of-life requirements. |