| Continuous inkjet (CIJ) | Projects small droplets of liquid ink onto a surface without requiring the part to stop. | Many non-porous surfaces, including metals, plastics, glass, and coated materials; ink must be matched to the substrate. | Typically a small, fast-drying text, code, or spot. Durability depends on ink chemistry, surface condition, and exposure. | High-speed lines and moving products; can be integrated with sensors or inspection equipment. | Non-contact marking; supports rapid marking and variable information. | Requires ink and solvent management. Verify adhesion, drying time, contrast, and resistance to oils, abrasion, or cleaning chemicals. |
| Thermal inkjet (TIJ) | Heats ink in a cartridge to form droplets that are deposited on the product. | Paper, cardboard, and selected plastics, metals, or coated surfaces when compatible ink is used. | Sharp characters and codes; permanence varies with ink formulation and substrate. | Intermittent or moderate-speed marking, especially where clean, compact equipment is useful. | Non-contact process; cartridge-based ink supply can simplify routine replacement. | Cartridges require replacement, and print performance can depend on distance, surface texture, and environmental conditions. |
| Laser marking | Uses a focused laser to change a surface by discoloration, engraving, foaming, or material removal, depending on the material and process. | Metals and selected plastics, ceramics, glass, or coatings; the appropriate laser and settings depend on the material. | Can create durable marks without ink. Mark appearance and depth vary by material and process. | Automated production cells and applications needing repeatable, permanent marks. | No ink or label consumables; precise, programmable marking. | Higher initial system and integration requirements. Assess laser safety, extraction needs, heat effects, and whether the mark changes material properties. |
| Dot peen (impact marking) | A carbide or hardened stylus makes a pattern of small impact points on the surface. | Metals and other sufficiently rigid materials; suitability depends on hardness, thickness, and part support. | Permanent indented characters, codes, or patterns; the mark is physically formed in the surface. | Stationary parts or controlled fixtures; commonly used where a durable identification mark is needed. | Does not rely on ink or surface color; marks can remain visible after some surface treatments. | Creates noise and surface deformation. Consider part vibration, thin-wall damage, cosmetic requirements, and whether the indent could affect function. |
| Scribe marking | A hard point is drawn across the surface to create a continuous groove. | Primarily metals and other materials that can be scratched consistently. | Continuous, permanent line or character marks; visibility depends on lighting, finish, and groove depth. | Controlled, usually stationary marking of rigid components. | Can produce clear, durable marks with less impact vibration than dot peen. | Leaves a groove and may affect coatings or corrosion protection. Test mark depth, surface finish, and downstream cleaning or finishing requirements. |
| Paint or industrial marker | An operator or automated applicator deposits a visible line, dot, or symbol using paint or marker ink. | Many surfaces, including metal, wood, concrete, and some plastics; formulation must suit the surface and environment. | Highly visible temporary or semi-permanent mark; removal and wear resistance vary by product. | Manual sorting, rework areas, and low-volume or flexible workflows. | Simple to deploy; useful for large, conspicuous visual marks and irregular locations. | Consistency can vary with operator and application. Check drying, smearing, chemical compatibility, and whether the mark is acceptable on the finished product. |
| Adhesive label or tag | A printed label or tag is attached to the part, package, or container. | Flat or suitably shaped surfaces that provide adequate adhesion; label stock and adhesive must match the substrate and conditions. | Can carry text, barcodes, or other identification; may be removable or permanent depending on label construction. | Manual or automated application; useful when information needs to be readable without altering the product surface. | Supports detailed information and can avoid direct marking of sensitive surfaces. | Labels may peel, become obscured, or be damaged by heat, moisture, chemicals, or abrasion. Validate adhesion and traceability throughout handling. |