| Measurement technology | Whether the proposed gauge uses an appropriate principle, such as thermal conductivity (including Pirani), capacitance diaphragm, cold cathode, or hot cathode. | Technical datasheet describing the measurement principle, intended pressure range, gas limitations, and operating conditions. | Match the technology to the pressure range, gas composition, contamination risk, and process conditions. Ask how gas-dependent readings are handled. | The supplier explains relevant limitations and recommends a model based on the actual application rather than pressure range alone. |
| Range and performance | Specified measurement range, accuracy or uncertainty, repeatability, resolution, response behavior, and environmental limits. | Current model-specific datasheet and, where applicable, calibration documentation with stated conditions and uncertainty. | Confirm that the required operating points fall within the stated range and that performance specifications apply to your gas, temperature, and installation conditions. | Specifications are clearly defined for the exact model and do not rely on an unexplained, generic accuracy claim. |
| Calibration and traceability | Calibration method, calibration interval guidance, available certificates, and the traceability stated for calibration results. | Sample calibration certificate, calibration procedure summary, and details of the laboratory or reference standards used. | Check that the certificate identifies the instrument and calibration conditions, and that its traceability and uncertainty meet your quality requirements. | Calibration records are clear, model-specific, and available in a format suitable for the buyer’s quality system. |
| Quality management | Documented manufacturing and quality-control processes, including inspection, nonconformance handling, and product change control. | Quality-system certificate, its scope and validity, plus relevant inspection or control documentation where available. | Verify the certificate with its issuer and confirm that its scope is relevant to the products or processes being supplied. | The supplier provides verifiable quality-system information and can explain how product changes and quality issues are managed. |
| Materials and process compatibility | Wetted materials, seal options, connector configuration, cleanliness requirements, and resistance to the buyer’s process environment. | Materials list, interface drawings, operating limits, and written compatibility guidance for the intended application. | Review exposure to corrosive, condensable, or particulate-bearing gases and confirm flange, seal, and installation requirements. | Compatibility advice is based on the stated process conditions and is documented for the selected configuration. |
| Electrical and system integration | Supply requirements, output type, connector pinout, communication protocol, controller compatibility, and configuration options. | Wiring diagrams, interface specifications, protocol documentation, and compatible controller information. | Compare the interface with the existing control system and confirm signal scaling, units, alarms, and any required configuration tools. | Integration requirements are documented clearly, with technical assistance available for setup and troubleshooting. |
| Technical support | Availability of application engineering, installation guidance, troubleshooting, repair, and calibration support. | Support channels, service locations, escalation process, service scope, and any stated response or repair terms. | Ask who provides support in your region, which languages are available, and whether service covers your specific model. | Support responsibilities and service routes are clear before purchase, including escalation beyond the initial sales contact. |
| Global availability and logistics | Ability to supply the required configuration internationally, with appropriate shipping, export, and import documentation. | Written confirmation of shipping origin, lead-time estimate, regional service arrangements, and documentation provided with shipment. | Confirm delivery terms, destination-country requirements, spare-part access, and whether any local service partner is authorized for the product. | Lead times, regional coverage, and the division of responsibility between the supplier and any local partner are stated transparently. |
| Lifecycle and spare parts | Repairability, replacement sensor or electronics availability, product-change notices, and end-of-life communication. | Spare-parts information, repair policy, warranty terms, and product lifecycle or discontinuation policy. | Ask how long commonly replaced components are supported and what alternatives are offered if a model is discontinued. | The supplier provides practical lifecycle information and a defined route for repair, replacement, or migration. |
| Documentation and commercial clarity | Completeness and consistency of manuals, safety information, model configuration, warranty coverage, and quotation terms. | Operating manual, installation instructions, safety notices, written quotation, warranty conditions, and applicable compliance documents. | Check that documents match the exact model and configuration, and clarify exclusions, return conditions, and warranty coverage before ordering. | Product and commercial documentation is consistent, current, and specific to the configuration being purchased. |