| Liquid pre-filtration | Water, process liquids, and compatible chemical solutions | Suspended solids, scale, and other particles larger than the selected openings or pores | Liquid passes through the disc while particles are retained at the surface or within a porous structure. | Woven or perforated metal for relatively coarse filtration; sintered porous metal for finer particle capture. | Consider particle size, flow rate, pressure drop, fluid compatibility, and cleaning method. |
| Gas and compressed-air filtration | Air and industrial gases | Dust, rust, and other entrained solid particles | Gas flows through the filter medium; particles are intercepted or captured within its passages. | Porous sintered metal or a supported metal mesh, selected for the operating conditions. | Account for gas temperature, pressure, flow, required cleanliness, and any moisture or oil present. |
| Protection of pumps, valves, and nozzles | Liquids or gases moving through process equipment | Debris that could obstruct small passages or damage downstream components | Installed upstream, the disc acts as a protective screen or filter before the fluid reaches sensitive equipment. | Usually a sturdy woven mesh, perforated plate, or supported metal disc. | Choose an opening that protects the equipment without restricting the required flow excessively. |
| Filtration in high-temperature processes | Hot gases or liquids, depending on the metal and system design | Solid contaminants carried by the process stream | The metal medium provides a porous path that allows the process fluid to pass while retaining selected solids. | Heat-resistant metal mesh or sintered metal, with the alloy matched to the service conditions. | Check temperature limits, oxidation and corrosion resistance, pressure rating, and thermal cycling. |
| Reusable process filtration | Recoverable liquids or gases in systems designed for filter cleaning | Accumulated suspended solids and process debris | Particles collect on or inside the disc; the disc can be removed and cleaned when the design and process allow. | Metal mesh or sintered metal with mechanical support appropriate to the pressure and cleaning method. | Confirm that cleaning can restore adequate flow and that the filter is compatible with the cleaning chemicals or method. |
| Particle separation in a defined size range | Process streams requiring a specified degree of particle retention | Particles targeted by the selected mesh opening or porous-medium rating | Mesh separates mainly by opening size; porous media can capture particles at the surface and within the media. | Woven mesh for clearly defined openings; sintered porous metal where depth filtration or finer media is needed. | Check whether the stated rating is nominal or absolute and verify performance under actual operating conditions. |