| Optical Network Terminal (ONT) | The ONT is the customer-side device that connects a fiber access network to local equipment, such as a router, computer, or telephone adapter. | Optical signals on the fiber; electrical data at user-facing ports | It provides the interface between the optical access link and the home or business network. |
| Downstream optical reception | An optical receiver detects light pulses arriving from the provider’s optical network and converts them into electrical signals. | In many GPON deployments, downstream data uses a wavelength near 1490 nm. | The receiver makes the information carried by light available to the ONT’s electronic circuitry. |
| Upstream optical transmission | An optical transmitter converts the ONT’s outgoing electrical data into light and sends it toward the access network. | In many GPON deployments, upstream data uses a wavelength near 1310 nm. | Upstream transmissions are coordinated so multiple terminals can share the same passive optical network. |
| Optical filtering and transceiver | Optical components separate or direct the relevant wavelengths, while the transceiver performs optical-to-electrical and electrical-to-optical conversion. | Wavelengths and optical power levels depend on the access standard and network design. | Separate wavelength bands can allow upstream and downstream traffic to travel over the same fiber. |
| Signal processing | Digital circuitry recovers the received data, checks framing and error information, and prepares traffic for delivery to the correct interface. | Digital frames and packets | Converts the recovered bitstream into traffic that networking equipment can process. |
| Shared-network access control | On a passive optical network, the ONT follows network instructions for receiving downstream traffic and transmitting upstream in its assigned time slots. | Time-division sharing and network-management messages | Helps multiple subscriber terminals use a shared optical connection without transmitting upstream simultaneously. |
| Ethernet output | The ONT presents data through one or more Ethernet ports. A separate router may then provide Wi-Fi, routing, and local network services. | Electrical Ethernet signals over twisted-pair cable | Connects the fiber service to common wired networking equipment. |
| Voice or other service interfaces | Some ONTs include additional interfaces, such as telephone ports; availability depends on the device and subscribed service. | May carry voice service or other provider-configured traffic | Allows one device to support more than internet access when the network and hardware are configured for it. |
| Example PON line rates | GPON has nominal line rates of about 2.488 Gbit/s downstream and 1.244 Gbit/s upstream. XGS-PON has nominal line rates of about 9.953 Gbit/s in each direction. | Shared access-network line rates, not guaranteed per-subscriber throughput | Actual user speeds depend on the service plan, shared network load, equipment, and other bottlenecks. |