| Machine type | Rotary cable machine | An electric motor turns a flexible cable fitted with a cutting or cleaning attachment. The rotating cable is fed into the pipe to break up or retrieve an obstruction. | Removing localized blockages such as accumulated debris, roots, or grease in accessible drain and sewer lines. | The cable and attachment must suit the pipe diameter and blockage. Excessive force or unsuitable tools can damage a pipe, especially if it is deteriorated. |
| Machine type | Sectional cable machine | The operator connects cable sections as needed and rotates them through the line with a powered machine. | Cleaning longer runs where the operator needs to add or remove cable sections during the work. | Sections must be securely connected and handled carefully. The operator should keep track of the cable’s position and resistance. |
| Machine type | High-pressure water jetter | A pump sends pressurized water through a hose and a specialized nozzle. Rear-facing jets help propel the hose while water washes debris back toward the access point. | Flushing grease, sediment, and other deposits from suitable sewer lines; some nozzles can also address roots or scale. | Pressure and nozzle selection should match the pipe’s material and condition. Jetting requires appropriate training and control of wastewater and spray hazards. |
| Before cleaning | Locate and inspect the line | The operator identifies an appropriate access point and may use a sewer camera to assess the pipe and blockage before choosing a cleaning method. | Determining the blockage location, likely cause, pipe layout, and whether the line appears suitable for mechanical cleaning or jetting. | A camera inspection can help reveal cracks, offsets, or other damage that cleaning alone will not repair. |
| Setup | Prepare the work area and equipment | The machine is positioned near the access point. The operator selects suitable cables, cutters, or nozzles and establishes a controlled work area. | Preparing for safe access to a cleanout or other suitable entry point. | Wear appropriate protective equipment, keep bystanders clear, and follow the machine’s operating instructions. Sewer spaces may contain hazardous gases. |
| Cleaning process | Feed the tool or hose into the pipe | For cable cleaning, the rotating cable is advanced gradually. For jetting, the hose and nozzle are guided into the line while water is discharged. | Reaching the obstruction and beginning to loosen, cut, or flush material from the pipe. | Advance steadily rather than forcing equipment through resistance. Unexpected resistance may indicate a blockage, bend, or pipe defect. |
| Cleaning process | Clear and remove debris | A cable attachment breaks up or retrieves material; a water jet loosens deposits and carries them back toward the access point for removal. | Restoring flow by clearing the obstruction and removing loosened debris from the line. | Some obstructions, such as severe root intrusion or a collapsed pipe, may require repair rather than repeated cleaning. |
| After cleaning | Flush and verify flow | The line is flushed where appropriate, and flow is checked. A follow-up camera inspection may be used to confirm the result and inspect pipe condition. | Checking whether the blockage has cleared and identifying remaining deposits or damage. | Improved flow does not necessarily mean the pipe is structurally sound or that the underlying cause has been permanently resolved. |
| Maintenance | Clean and inspect equipment | Cables, cutters, hoses, nozzles, and other components are cleaned and checked for wear or damage after use. | Keeping equipment ready for future work and reducing the risk of failure during operation. | Follow the manufacturer’s maintenance instructions and replace worn or damaged parts before reuse. |