| 1 | Thermal spraying | Heated or accelerated coating material is deposited onto a prepared surface as a coating. | Steel structures, rolls, turbine components, and machine parts | Power generation, steel production, petrochemical equipment, and machinery maintenance | To improve wear, corrosion, or heat resistance, depending on the coating material and service conditions. |
| 2 | Physical vapor deposition (PVD) | Material is vaporized in a vacuum and condensed as a thin film on a component. | Cutting tools, dies, molds, and precision components | Metalworking, automotive manufacturing, electronics, and tooling | To add thin, functional coatings that can improve hardness, friction behavior, or wear resistance. |
| 3 | Chemical vapor deposition (CVD) | Chemical reactions of gaseous precursors form a solid coating on a heated substrate. | Cutting tools, semiconductor materials, and heat-resistant components | Toolmaking, electronics, and advanced materials production | To form uniform coatings; the achievable properties depend on the deposited material and process conditions. |
| 4 | Electroplating | An electric current deposits a metallic layer from an electrolyte onto a conductive workpiece. | Steel and other conductive components | Automotive parts, hardware, machinery, and electrical components | To provide a metallic finish or improve corrosion resistance, conductivity, or wear performance, depending on the plated metal. |
| 5 | Anodizing | An electrochemical process thickens the protective oxide layer on a metal surface, commonly aluminum. | Aluminum profiles, housings, panels, and components | Construction, transportation, consumer products, and electronics | To improve corrosion and wear resistance and, where specified, provide a surface suitable for coloring. |
| 6 | Nitriding | Nitrogen diffuses into the surface of a ferrous alloy to form a hardened surface layer. | Gears, crankshafts, dies, and other alloy-steel parts | Automotive, machinery, tooling, and general equipment manufacturing | To increase surface hardness and resistance to wear and fatigue while limiting dimensional change compared with some other hardening treatments. |
| 7 | Carburizing | Carbon diffuses into the surface of low-carbon steel, followed by hardening heat treatment. | Gears, shafts, bearings, and transmission components | Automotive, construction machinery, and industrial gear manufacturing | To produce a hard, wear-resistant case with a tougher core. |
| 8 | Laser cladding | A laser melts feedstock and a thin portion of the substrate to create a metallurgically bonded layer. | Valves, rolls, shafts, molds, and equipment components | Mining, energy, metallurgy, and repair or remanufacturing operations | To restore worn surfaces or apply localized layers selected for corrosion, wear, or heat resistance. |
| 9 | Shot peening | Small media impact the surface, inducing compressive residual stresses in the near-surface material. | Springs, gears, and fatigue-loaded metal components | Automotive, aerospace, rail, and machinery manufacturing | To improve fatigue performance when the process is properly controlled for the component and loading conditions. |
| 10 | Thermal barrier coatings | A heat-insulating ceramic coating is applied over a bond coat on a heat-exposed component. | Gas-turbine hot-section components and other high-temperature parts | Power generation, aviation, and industrial gas turbines | To reduce heat transfer to the underlying component; coating design and service life depend on operating conditions. |