| Postcards and Greeting Cards | Common formats include 4 × 6 in and 5 × 7 in; suitable for mailers, invitations, and retail cards. | Short animation, flip image, or shallow 3D depth. | Ask the supplier to recommend lens pitch and viewing angle for the intended viewing distance. Artwork must be interlaced to match the selected lens. | Check image registration, clean cuts, flatness, edge finish, and whether the effect remains clear when viewed straight on. | Request a physical sample, a proof made with the proposed lens, and confirmation of available card stocks and finishing options. |
| Posters and Wall Displays | Commonly produced in standard poster formats such as A3 or A2, as well as custom sizes. | Large-format 3D depth, flip, or motion effect for retail and promotional displays. | Viewing distance and display lighting affect the perceived result. Confirm the intended viewing conditions before approving the lens and artwork. | Inspect image alignment across the full sheet, surface scratches, color consistency, warping, and clarity at the intended viewing distance. | Ask for large-format samples, documented inspection steps, packing details, and confirmation of how the supplier prevents bending or surface damage in transit. |
| Product Labels and Stickers | Custom die-cut shapes and sizes for packaging, promotional labels, and collectible stickers. | Compact flip or motion effects; depth effects may be used where the design and viewing area allow. | Confirm adhesive type, application surface, label dimensions, and compatibility between the lens sheet and finishing process. | Check die-cut accuracy, clean edges, adhesion on the intended surface, image registration, and resistance to handling. | Request samples applied to the actual packaging material and ask the supplier to confirm available adhesives, cutting tolerances, and roll or sheet delivery options. |
| Packaging Panels and Sleeves | Custom panels, inserts, sleeves, or other packaging components; dimensions depend on the package design. | Brand-neutral visual effects such as image flips, short motion sequences, or dimensional artwork. | Check panel size, fold or crease locations, and how the lenticular layer will be incorporated into the finished package. | Evaluate registration, fold alignment, surface protection, color consistency, and whether assembly affects the lenticular image. | Request a finished packaging prototype and confirm the supplier can coordinate printing, die-cutting, lamination, and assembly as required. |
| Retail Signage and Point-of-Sale Displays | Countertop displays, shelf signs, and larger custom display panels. | High-visibility depth, flip, or motion effects designed for viewers at a defined distance. | Specify viewing distance, viewing direction, panel size, mounting method, and indoor or outdoor use before production. | Check readability, image stability from the expected viewing position, panel flatness, mounting accuracy, and surface condition. | Ask for a sample at a representative size, mounting or installation guidance, and confirmation of the substrate and protective finish offered. |
| Lens-Sheet Selection | Lens pitch is selected for the artwork, print process, product size, and viewing conditions rather than by product name alone. | Lens pitch and viewing geometry influence the appearance of depth, motion, and image transitions. | Commonly available pitches vary by supplier and application. Request the actual lens specification and a matched proof; do not approve artwork from pitch alone. | Check for visible banding, ghosting, moiré, uneven transitions, and mismatch between the printed image and lens sheet. | Ask for a lens sample or specification sheet, the recommended artwork setup, and written confirmation that the production proof uses the proposed material. |
| Buyer note: Sizes and product features above are typical examples, not fixed industry standards. Approve production only after reviewing a physical proof made with the intended lens, print method, substrate, and finishing process. |